White Mode; Battery Status (When Handle Is Not On Charger) - Philips SonicPro 50 Manual De Instrucciones

White mode

Gum Care mode
Battery status and charging
Battery status (when handle is not on
charger)
White is a 2-minute 30-seconds mode.
Gum Care is a 3-minute mode.
Charging
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger.
- The handle will emit two beeps when
charging begins.
- The battery indicator light will flash when the
toothbrush is charging.
- When the handle is fully charged on the
charger, the battery indicator light will turn
solid green for 30 seconds and switch off.
Note: Your toothbrush comes pre-charged for first
use. After first use, charge for at least 24 hours.
When removing the handle from the charger, the
battery indicator light at the bottom of the handle
will indicate the status of the battery.
- Solid green LED: full battery
- Flashing green LED: medium battery
- Flashing amber LED and three beeps: low
battery
- Flashing amber LED and two sets of five beeps:
No brushing sessions left (charge toothbrush)
11
English