GRAVEDA GRASPRESSO GP3-20 Manual De Instrucciones página 33

Unit Overview and Operations
4. Press the "up" or "down" buton to select the
5. Press the SET buton again to select the
1
6. Press the SET buton again to set when the
7. Press the SET buton again. You will return to
desired time in seconds.
P2 is displayed on the control panel.
temperature unit.
P3 is displayed on the control panel.
Now you can set whether the temperature
should be displayed in °C or °F. Use the "up" or
"down" butons again.
Press should switch off automatically.
P4 is displayed on the control panel.
The device switches off the heating function
automatically after the set time has elapsed.
You can switch on the heating function again by
pressing any buton on the control panel. The
machine switches on again with the previously
set parameters.
You can also skip this procedure by pressing the
SET buton.
the main mode. The heating plates are now
heated.
Page 26.1