Seltron MP15 Instrucciones Para El Montaje página 2

Installation manual for actuators
Mixing valve instalation
The mixing valve can be mounted and sealed with teflon sealing tape, yarn
and sealing paste or anaerobic synthetic resin. In case of sealing with anae-
robic synthetic resin, make sure that all the junctions are well degreased.
Seltron mixing valves.
The valve position indication plate needs to be adjusted after the valve instal-
lation. To adjust the indication plate, act as follows:
1. Remove the Seger ring 1 from the valve shaft.
2. Put the indication plate 2 in the proper position
(see pictures 2, 3 and 4).
3. Refit the Seger ring 1.
2
Installation manual