Directions For Use - Kerbl 37116 Instrucciones De Uso

2. Directions For Use

2.1 Slacken The Rope
Make sure that the safety hook and
rope sheave are anchored to a sturdy
point. Press the release spring down
in the direction of the arrow A.
Lift the lever up and hold in position
C, then press the locking hook down
in the direction of the arrow D; at the
same time pulling until the rope is
slackened.
2.2 Tauten The Rope
By pressing the release spring in the direction of the arrow B, link release hook into the rack wheel.
Now tauten the rope by lifting the rope up and away.
2.3 Reducing The Tension On The Rope
Press release spring down in direction of the arrow A. Keep the lever pressed down until the release hook presses the
locking hook upwards and releases it; the rack wheel is now free and is loosened by one revolution. Repeat this step as
described in order to reduce the tension by one revolution each time.
WARNING: Avoid abrupt movements of the level when reducing the tension on the rope.
Exert steady, even pressure on the lever!
3. Technical Information: (Steel Cable, double)
Type
Permissible Tractive Force
Length Of Rope
Diameter Of Rope
Leverage Effect
CE-symbol/EG-conformity declaration
We, Albert Kerbl GmbH, declare with sole responsibility that the product:
Cable pull (37116, 37117)
complies with the requirements of Directive: 2006/42/EC (Machinery Directive).
Representative for compilation of the technical documents:
Robert Numberger, Albert Kerbl GmbH, Felizenzell 9, D-84428 Buchbach
The CE-symbol stands for fulfilment of the European Union guidelines.
The declaration of conformity can be viewed by visiting http://www.kerbl.de.
Felizenzell, den 09.10.2013
Albert Kerbl, Managing Director
Release Spring
Release Hook
Locking Hook
37116
2000 kg
3 m
5 mm
15 : 1
7
Rack Wheel sturdy Anchoring Point
37117
4000 kg
3 m
6 mm
15 : 1