Microban MEDLINE ELEMENTS MDS89664ELMB Manual De Instrucciones Para El Usuario Y Garantía página 5

NOTE: It is recommended that all four hand screws (C) for a sin-
gle leg mainframe (B) be loosely crewed into place. Once all the
screws are in place then fully tighten through the aligned holes.
Step 3: Attach leg extensions (D) to leg mainframes (B).
Depress the push-buttons on the mainframe and place feet leg extensions (D) over leg
mainframe (B) until secured at desired height position. Repeat with three remaining legs.
Make sure all four extension legs are installed at the same height.
Make certain that the snap buttons fully protrude
through the same respective adjustment hole
of each leg extension. This ensures that the leg
extensions are securely locked in position and an
even height adjustment is achieved.
Step 3
Part tWo: assemble the armrests
Step 1 Step 2
E
Step 1: Attach armrest (E) to the topside of the leg mainframes (B).
Flip commode over so it is resting with all four feet securely on the floor. Ensure that
the legs are all set to the same height level. Insert one of the armrests (E) down into
the upward facing tubes of the leg mainframes (B). Once inserted, press down the push
buttons on both sides of the armrest (E) and continue to slide into the leg mainframe
tube (G) until the push-buttons lock into place.
Make sure push-buttons are fully protruded before using. Repeat this step with the
other armrest.
NOTE: Apply the armrests (E) so the handles (top portion) are
angled outward creating more clearance between the two
armrests (E).
1-800-MEDLINE (633-5463) | medline.com 5