ELECTRONIC SPEED CONTROL:
• The speed of the appliance can be regulated by using the speed
regulator control (?). This function is very useful, as it makes it
possible to adapt the speed of the appliance to the type of work
that needs to be done.
LOCKING BUTTON:
• Activating the locking button allows you to operate the appliance
without having to depress the run button.
• To activate this function press button (H) while holding down the
run button.
• To deactivate this function press the run button right down.
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
• Stop the appliance by releasing the on/off switch.
• Unplug the appliance from the mains.
• Clean the appliance.
CLEANING
• Disconnect the appliance from the mains and allow it to cool before
undertaking any cleaning task.
• Clean the electrical equipment and the mains connection with
a damp cloth and dry. DO NOT IMMERSE IN WATER OR ANY
OTHER LIQUID.
• Clean the equipment with a damp cloth with a few drops of wash-
ing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH such as
bleach, or abrasive products, for cleaning the appliance.
• Do not let water or any other liquid get into the air vents to avoid
damage to the inner parts of the appliance.
• Never submerge the appliance in water or any other liquid or place
it under running water.
• If the appliance is not in good condition of cleanliness, its surface
may degrade and inexorably affect the duration of the appliance's
useful life and could become unsafe to use.