Lighting
To carry out this operation, proceed as
follows.
Operate the appliance's master switch to
1)
connect it to the electrical mains.
Turn the knob (A) clockwise (1 setting) to
2)
turn on the cooking zone at the minimum
setting.
The mains light (B) comes on
Important
Before turning on the cooking zone, place the
full pan on it. Otherwise the (B) light fl ashes
until the pan is placed on the corresponding
zone correctly.
Use only the accessories recommended by the
manufacturer.
Turn the knob (A) to one of the other set-
3)
tings, to reduce the cooking zone power to
the level required.
Important
This appliance heats to the set temperature
very quickly, so set the cooking zone power
appropriately with this in mind.
Turning off
Turn the knob (A) to setting 2 to switch off the
1)
plate. The mains light (B) goes out.
GB
If the appliance is to be out of use for a lengthy
period, proceed as follows.
Turn off the appliance's circuit breaker to dis-
1)
connect it from the electrical mains.
Clean the appliance and the surrounding areas
2)
thoroughly.
3320010_ut_GB_rev.2
SWITCHING THE APPLIANCE ON AND OFF
.
LENGTHY DOWNTIMES OF APPLIANCE
A
A
Turn off the appliance's circuit breaker to dis-
2)
connect it from the electrical mains.
Spread a fi lm of edible oil over the stainless
3)
steel surfaces.
Carry out all the servicing procedures.
4)
Cover the appliance and leave a few gaps to
5)
allow air to circulate.
- 10 -
B
A
1
2
ENGLISH