Kenwood 2307K Instruciones Para El Uso página 3

HOW TO USE YOUR HEATER
Remove the feet and the wheels from the polystyrene packing. Turn the radiator upside-down
on a rug or a soft surface in order to prevent damaging the paint finish.
- Fit the wheels to the spindles on the feet and push firmly until they click into position. Pull
each wheel to check that it is correctly inserted.
- The feet with the casters must be fitted with two arc-shaped brackets and fit them using
the threaded bar and wing nut provided, only between the 1st and 2nd element and the
second to last (see fig. 1 to 3 inclusive).
CAUTION
Always operate the heater in upright position only (wheels on the bottom, controls on top).
Any other position could create hazardous situation!
ON/OFF Switches
Power lights
600 900
WATTS WATTS
TOTAL 1500 WATTS
The power lights indicate that the unit is
in operation, and which heat setting is
currently selected!
FITTING THE WHEELS
fig.1
fig.2
HEAT SETTING
For more energy-efficent operation, the Min or
Med settings may be used individually once the
unit has reached the operating temperature.
fig.3
3