Sylvania SA 220 Manual Del Usuario

Color: Black text
July 27, 06
Model: SA 220
Digital Outdoor Timer with 7 Outlets
•
Zip-Set Technology: Sunset Auto On
On/Off/Enter Button
Mode Button
Time Set Button
Calendar / 7-5-2 Button
Reverse
Reset Button
Function
Designed for outdoor use, the SA 220 can be mounted inside or outside on a wall or in the ground. Controls outdoor holiday, landscape, pool, spa accessories
and security lighting.
Function – The SA 220 has 7 outlets: 6 timed outlets which are powered and controlled by the SA 220 timer; and 1 extra untimed outlet which always has power.
Make sure all the timered outlet wires are neatly channneled through the outlet door slots to protect them from water or rain. We suggest that you always plug
any outdoor timer to a GFCI outlet. Connect your outdoor lighting, etc. to the desired timed outlet.
Please Note: the total rating (untimed extra outlet + timer outlets) of all items connected to the timer must not
exceed the SA 220 rating of 15 amps and that any timer settings applied are for all of the timed outlets; they cannot
operate independently.
If you exceed 15 AMPs, the timer's circuit breaker will trip.
To reset, press the red button on the bottom of the cabinet after reducing the load.
Zip-Set Quick Set-up
Zip-set Technology "Sunset Auto on" is easy to program. The clock is set at the factory to the (212) Eastern time zone so you just need to enter your area code before using. The
timer will automatically adjust for your location to turn your outdoor holiday, landscape and security lighting on at sunset. Your SA 220 will automatically adjust to the changing
sunset times as the year progresses.
Your program settings are protected by the intergrated back-up battery; even with brown-outs or black-outs, the Zip-set will store settings and turn your lights and appliances
correctly on at sunset once the electric current resumes.
Timer Operation
Manual Override
To override the On or Off settings, press the
Activate the Zip-Set Sunset timer
MODE Button until "ZIP" icon is displayed. The Zip-Set sunset timer is set and active.
1. Press the
2. SA 220, once properly set, knows the sunset time of your location. It will automatically turn on at sunset and turn off after
e ZIP-Set Telephone Area Code Setting)
14 or 16 hrs.(se
Random Button once to activate the random feature so the timer on/off time will fluctuate between +/-10 minutes to +/-120 minutes randomly. To cancel this
3. Press the
(random disappears)
feature, just press the button again
household activity and random should be activated.
Activate the Programmable timer
MODE Button until the wanted program icon (PROG 1,2,3,or 4) is displayed and the chosen timer program will be active.
1. Press
Random Button once to activatate the random feature so the timer on/off period will fluctuate between +/-10 minutes to +/-120 minutes randomly. To cancel
2. Press the
this feature, just press the button again
Turn off all timer functions:
If you don't want to use any timer functions, just press the
Confirm timer settings for ON/OFF: Press
Installing the Timer
There are 2 ways to install the SA220. You can either mount the unit on a wall or use the stake (provided) to insert into the ground.
(In order to meet the National Electrical Code 2002, you should use a receptacle cover that protects your outdoor receptacle, when timer is plugged in.
Wall Mounting Instructions:
The SA 220 requires two (2) #8 screws or
similar (not included) for wall mounting.Select a
suitable location at least 3 feet above grond and
within easy reach (8 inches or so) of a 3 prong
outlet. Line up the unit against the desired
surface and use a pencil or marker to mark the
location of the two screw holes. You may wish
to make starter guide holes with an awl or
Wall Mount
similar tool.
Screw the unit to the surface until it is firmly
attached. Make sure not to overtighten screws.
http://waterheatertimer.org/Sylvania-timers-and-manuals.html
10:09
PM
DST
7 5 2 PROG 1 2 3 4 ZIP OFF RANDOM
Front of Timer
Fast Set Up Instructions for Zip-Set™ Timers
Find and press "Mode" button, until you see the Zip-Set icon
1
Then depress & hold the Clear (Zip-Set) button until the display flashes.
Set your area code
2
3
Set how many hours after sunset that you wish the fixture to
turn the power off (2, 4, 6, 8, 10, 12, 14 or 16 hrs).
Yes- You are DONE!
Detailed set up and function instructions are on back side of this manual.
On/Off Button. The override setting will not change the next timed event.
. When your home is left unattended,
RANDOM
PROG
to
(random disappears)
.
RANDOM
MODE Button until "OFF" is displayed.
MODE, select program then press
Ground Stake
Random Button
Program Button
Forward/Hourly
Adjust Button
DST Button
Zip Set/Clear Button
Timed Outlets under front cover
Extra Extra Extra
Untimed Untimed Untimed
Outlet Outlet Outlet
Bottom of Timer
to
CLEAR
ZIP-SET
To set:
use "Reverse" / "Forward" buttons and ON/OFF
to Confirm or Enter.
then to set press
or
to
your selected duration time
this is an excellent security feature to simulate
OFF
to
PROGRAM button.
Ground Stake Instructions:
Look at the back of the unit for the stake
mounting holes.
Align the stake with the bottom lip on the
back of timer.
Slide stake in and screw the wingnuts into
holes and stake holes.
Thread the power cord into the stake wire
cutout hole.
Never use a hammer and DO NOT DRIVE
the STAKE INTO GROUND.
Insert the stake into the ground up to the
circular marking.
Thank you for purchasing the SA 220 outdoor digital
Timer, an easy to use outdoor digital timer with
Zip-Set Technology and other advanced features:
Features:
• Zip-Set Technology; automatically turns lights on at sunset
– just enter your phone area code.
• Outdoor Timer with large display and keypads
• 7 outlets – 6 timed controlled outlets and 1 untimed outlet
• 4 independent on/off programmable timers.
• DST (daylight savings time) switch.
• Timer settings are selectable to work weekends(2),
weekdays(5), or all week(7).
• Random function for security.
• Manual Override
• Resettable Circuit Breaker
• Battery Backup (batteries included)
This product has passed
ETL testing. It is certified
complies with both
and
U.S. and Canadian
product safety standards.
Timed
Outlets
Channel wires through
Reset
bottom outlet conduits
Circuit
Breaker
Timer Outlets
of 2, 4, 6, 8, 10, 12,
Align with lip
then screw
then
wingnuts
PROGRAM
into hole
Back of unit
Push stake into
ground to
circular mark