Hama Stand 75051786 Guia De Inicio Rapido página 10

Take the locking screw and screw the fixing bracket
in the camera mount.
Now use a suitable screwdriver and adjust the bracket to
the size of your TV unit. Tighten the screw.
Now mount the camera to your TV unit as shown in fig. 5.
V. Installation
Mounting the camera stand on the wall:
Use two screws to mount the wall bracket to the place
where you want the camera mount to be. Be sure to leave
enough room above the bracket for attaching the camera
mount. After you have securely screwed the wall bracket
to the wall, attach the camera mount to the wall bracket
as is shown in fig. 6.
VI. Safety instructions:
• Do not attempt to service or repair the device
yourself. Leave any service work to the responsible
qualified technicians.
• Do not modify the device in any way.
Doing so voids the warranty.
VII. Support and Contact Information
If products are defective:
Please contact your dealer or Hama Product Consulting
if you have any product claims.
Internet / World Wide Web:
Product support, new drivers or product information can
be found at www.hama.com
Support Hotline – Hama Product Consulting
(German / English):
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
E-mail: produktberatung@hama.de
9