Vollrath LidSaver LS03I Instrucciones De Instalación

LS03I models
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
LidSaver™ 3 In-Counter Lid Dispensers
LS03P models
LS03M models
©
Installation Instructions
Item No. Fits Lid Diameter
LS03IB-lid code
3¹⁄₄ - 3³⁄₄"
(8.3 - 9.5 cm)
LS03IBV-lid code
LS03PB-lid code
3¹³⁄₁₆ - 4³⁄₄ "
(9.7 - 12.1 cm)
LS03PVB-lid code
3¹⁄₄ - 3³⁄₄"
LS03IS18B-lid code
(8.3 - 9.5 cm)
3¹³⁄₁₆ - 4³⁄₄ "
LS03PS18B-lid code
(9.7 - 12.1 cm)
1¾- 3³⁄₁₆"
LS03MS18B-lid code
(4.4 - 8.1cm)
NOTICE: Each LidSaver™ is factory set to dispense a particular lid.
If you change lid manufacturers or if the manufacturer
changes the lid or you wish to dispense a different size lid,
your LidSaver™ will need to be modified. Vollrath offers
lid change out kits that are easy to install. Visit
www.Vollrath.com for more information.
TOOLS YOU WILL NEED
• #2 Phillips Screwdriver
• Drill and 0.125" – 0.136" Drill Bit (For #8 Pilot Hole)
• Sabre Saw or Hand Router
• Cabinet Cut-Out Template (included)
• #8 x 1.00" Flat Head Wood Screws (included)
REQUIRED CLEARANCE FOR DOOR
NOTICE: When mounting a LidSaver™ dispenser above a lateral
surface (such as a shelf extending straight out from the
countertop face) there must clearance for the dispensing
door to fully open.
Item No.
LS03IB-lid code
LS03IBV-lid code
LS03IS18B-lid code
LS03PB-lid code
LS03PVB-lid code
LS03PS18B-lid code
LS03MS18B-lid code
2019 The Vollrath Company L.L.C.
Mounting Tube Depth
Horizontal
Vertical
23"
(58.4)
Horizontal
Vertical
18"
Horizontal
(45.7 cm)
18"
Horizontal
(45.7 cm)
A
A (Inches (CM))
1¹⁵⁄₁₆
(4.9)
1⁵⁄₁₆ (3.3)
Part No. 8013226-1 ml 8/27/19