Parts & Assembly; Back Panel - Nostalgia Products RF6RRBK Manual De Instrucciones

PARTS & ASSEMBLY
Before using, remove all packing materials from inside the beverage cooler and place
beverage cooler on a stable, secure flat surface. Also, check the beverage cooler for any
damage, such as misaligned or bent door, damaged door seals and sealing surfaces,
broken or loose door hinges and latches and dents inside the beverage cooler or on the
door. If there is any damage, DO NOT use the beverage cooler. Return damaged item to
the store where it was purchased.
Carry Handle
Removable
Shelf

BACK PANEL

Dry Erase
Marker
HOT/OFF/COLD Selector: Toggle the switch
from OFF to HOT or COLD based on whether
you want to heat or cool your beverages.
Red Indicator Light: Indicates that the toggle
switch is in the HOT position and is heating
the interior of the beverage fridge.
Green Indicator Light: Indicates that the toggle
switch is in the COLD position and is cooling
the interior of the beverage fridge.
DC/12V: Insert the DC power cord into this port to
use beverage fridge in 12 volt power outlets.
AC/110V: Insert the AC power cord into this port to use
beverage fridge in standard 120 volt electrical outlets.
AC 120V DC 12V
Power Cord Power Cord
Door
Handle
6