Recording And Playback - PNI House WiFi550 Manual De Usuario

EN
NVR MENU
Connect the NVR to a monitor via the HDMI or VGA cable.
Authentication data:
User: Admin
Password: 1234
ADD IP CAMERA
1. Right-click on the main screen, select IP Camera - Add - Match Code.
Note: If you want to pair a single camera, connect the IP camera and the NVR with an Ethernet cable. If you
want to pair multiple cameras, connect the NVR cameras via a switch.
2. After you click Match Code, the system will synchronize the camera and the NVR.
3. After completing the pairing procedure, click Search, then Add all or the "+" icon to add only the desired
cameras.
Note: Cameras in the PNI House WiFi550 kit are paired from the factory, no need to follow the camera adding
procedure. The images captured by the cameras will be automatically displayed immediately after powering up
the NVR and cameras. If you want to add additional cameras, follow the steps above.

RECORDING AND PLAYBACK

Notes:
• In order to register, a hard disk set in Read-Write mode must be installed in the NVR.
• Before you first use, format the hard disk. The hard drive is not included in this kit.
1. Right-click on the main screen, select Menu - Disk.
2. Scheduled recording. In the main interface, right click - Menu - Record - Record Time - choose one of
4