Motion Concepts MaTRx PB-Elite Instrucciones De Instalación página 2

Installation Instructions:
MaTRx PB-Elite Headrest Mounting Plate
MaTRx PB-Elite Headrest Mounting Plate
2.0 Mounting Locations for Headrest Plates
Figure 2a - Headrest Mounting Plate- LARGE
ALL Large style plates can be
located along the lower edge of
the backpan cut-out as indicated
12" (31cm) Height
Figure 2b - Headrest Mounting Plate- MEDIUM
16" (31cm) and
20" (41cm) Heights
Figure 2c - Headrest Mounting Plate- SMALL
12" (31cm) Height
- 2 -
(for 18" (46 cm) width and up)
16" (41cm) Height
Medium style plates should be centered
bewteen the upper mounting bosses and
the backpan cut-out for 12" (31cm) & 16"
(41cm) back heights (as shown); for 20"
(51cm) back heigths, locate the plate
along the lower edge of the cut-out.
(for 12" (31
16" (41cm) Height
20" (51cm) Height
(for 13" (33cm) - 17" (43cm) widths)
) width only)
cm
Headrest plates for all 12" (31cm) wide
backpans are to be centered over the
mounting bosses
(note: 20" (51cm) back heights are not avail-
able with the 12" (31cm) wide PB-elite backs)
20" (51cm) Height