Vision TC-HDMIIP/V2 Manual De Producto página 2

PRODUCT MANUAL TC-HDMIIP/V2
EN
1 TRANSMITTER
HDMI OUT HDMI IN RESET
1 2 3
1. HDMI Loop Out 4. RJ45 Output - CAT6 cable up to 150
metres (492 ft) long
2. HDMI Input
3. Reset 5. IR blaster 3.5mm Minijack socket -
>3s press reset EDID to 1920 x 1080 @ supports most infrared signals from
60 Hz 20-60 kHz
2 RECEIVER
HDMI OUT RESET
1 2
3. RJ45 Input - CAT6 cable up to 150
1. HDMI Out
2. Reset metres (492 ft) long
>3s long press reset EDID to 1920 x 1080 4. IR receiver 3.5mm Minijack socket -
supports most infrared signals from
@ 60 Hz
<3s short press copy EDID from display 20-60 kHz
to source
2
CAT OUT IR OUT DC 5V
4 5 6 7 8
6. Link LED – will flash when correctly
connected, if this is not lighting check
ethernet cable
7. Power Indicator
8. Power Input 5V/1A
CAT IN IR IN DC 5V
3 4 5 6 7
5. Link LED – will flash when correctly
connected, if this is not lighting check
ethernet cable
6. Power Indicator
7. Power Input 5V/1A
3 SETUP
This product is plug and play. There is no online device management with this product.
DIRECT CONNECTION EXAMPLE
HDMI OUT HDMI IN RESET
CAT OUT IR OUT DC 5V
IR Blaster
HDMI OUT RESET
CAT IN IR IN
Power
IR Receiver
DC 5V
Power
3