Innofit INN-056 Manual De Instrucciones página 8

HOW THE PRODUCT WORKS
Insert the power cable into the plastic rack, see picture n.1.
Take out the inner heating element from the belt. Place it with the plug upwards on a
flat and stable surface.
It's possible to heat up the unit also when it's inside the cover.
Plug in the power cord in the plastic part of the bag and connect the plug to socket,
see picture n.2.
This appliance contains a solution of salty water which heats up rapidly and safely.
At the end of the heating- phase, the temperature reaches approximately 58°C and the
LED indicators turns off. The heating time is about 12 minutes. Disconnect the power
cord from the socket and the product. To ensure heating more symmetrical, please sha-
ke the warmer. The heating pad is ready to use.
N.B: Always put the inner heating element inside the belt, when you use the product.
INN-056 remains hot for 2 hours, depending on the outside temperature.
When the pad is cool, it's possible to heat it up again
After the use, always put the product and store it in a clean and dry place, keep it away
from heating sources and sun rays . Humidity might damage the product.
8
Picture n. 1
Picture n. 2
GB