Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
INSTALL DOOR PANEL TO SIDE PANEL
Choose door opening orientation: left-hand or right-hand.
Hinge screw locations indicate front edge of side panels (A & B).
NOTE: Instructions indicate the door mounted to the left side panel (B).
HINT: Use the other side panel (A) to hold the door up to the level for ease of alignment.
Place door (C) into position, align TOP hinge hole with side panel (B) screw boss.
You will need six hinge screws (H) for assembly.
1. Install top screw (1).
2. Align bottom hole and install screw (2).
3. Install remaining screws in sequence (3-6).
CAUTION: Do not over-tighten screws.
STEP 2
INSTALL DOOR MAGNET TO SIDE PANEL
Choose remaining side panel (A or B).
Position magnet (I) to align with mounting holes in side panel (A).
Install using two magnet screws (J).
NOTE: The magnet position may need adjustment after complete assembly to ensure
proper door alignment.
CAUTION: Do not over-tighten screws.
2
A
I
6
5
4
3
B
3
C
1
I
Publicidad
