Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Mainstays MS19D4102223
Resumen de contenidos para Mainstays MS19D4102223
- Página 1 MAINSTAYS POWER ADJUSTABLE BED BASE MS19D4102223/MS19D4102225/MS19D4102227/MS19D4102229...
-
Página 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed, including the following: Read all instructions before using (this furnishing). DANGER - To reduce the risk of electric shock: 1.Always unplug this furnishing from the electrical outlet before cleaning. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: Unplug from outlet before putting on or taking off parts. - Página 3 Carefully open the carton and remove all boxes then lay out the top and the bottom of the base as one unit as shown. Cut all zip ties and remove. To attach the cornerbed legs, rotate the end bolts into the holes in the corner brackets.
- Página 4 Put remaining legs on the base and tighten. When ready to flip the base over, make sure you do not use the legs as leverage as they may damage the legs and/orbase. Insert the mattress retainer bar into the grommets as shown.
- Página 5 CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Página 6 SYNCING ONE REMOTE: Each base comes factory synced to its own remote. If not synced follow these instructions: Step 1: Push the recover button on cord under the bed, hold the “head down” button and the “foot up” button on the remote at the same time for 10 seconds. Step 2: Once you hear a beep that will indicate that the remote is synced.