Velour Heated Seat Cushion
CARE AND MAINTENANCE
•
To disconnect, turn all controls to the off position, then remove plug from outlet.
•
Never immerse the product in water.
•
Do not use any chemical or abrasive cleaning materials, as these may damage the product
and create an electrical safety hazard.
•
When not in use, store the product in a secure place away from sharp objects, excessive
heat, dampness or other conditions which may cause damage or soiling.
•
Do not twist or wrap the power cord around the product.
•
DO NOT fold cushion excessively, bunch, or twist in any way as this will cause overheating,
which could result in burning or fire.
•
Disconnect DC cord when not in use.
•
This product has no user serviceable parts.
SPECIFICATIONS
Material
Dimensions
Power cord length
Temperature control (Hi/Low/
Off)
Input power
Power consumption
Fuse
4
by HealthMate Products
™
Super soft velour, polyester and polyurethane foam with elastic straps
94.0 × 2.5 × 45.0 cm (37.0 × 1.0 × 17.7 in.)
1.3 m (4.3 ft)
Thermostat controls the temperature: Max 45.6 °C (114.0 °F) for High
and 42.2 °C (108.0° F) for Low on the surface of the cushion if the
surrounding temperature is 15.0 °C (59.0 °F)
12V DC
40W ± 3W for High
36W ± 2W for Low
5A
www.wagan.com
®