BizLine SD 1600 Instrucciones De Servicio página 7

Some sample applications
● Paints and enamels can be cleanly removed with the aid
of a spatula (potentiometer position 3–6 as required).
● Frozen water pipes can be thawed without damage
(temperature may be adjusted as required).
Take care when working near wooden walls and
wooden false ceiling s. Increased dange r of fire or
smouldering fire!
● Removing wallpaper with the aid of hot air, especially
useful in the case of ingrain wallpapers.
● Loosening fitted carpets from below.
● Remove the subsoil from the car.
● Removing inconvenient stickers from cars.
● Remove blisters from PVC stickers by warming.
● Waxing skis.
● Repairing of skis and surfboards and other sporting
equipment.
● Staining wood with hot air instead of using dangerous
flames.
● Sterilizing.
● Expansion of hoses and plastic pipes.
● Repair of enamel defects.
● Soldering with tin solder, as well as tin coating of car
body- and sheet-metal parts (potentiometer position 6
= max. temp.).
● Dry paints and knifing fillers with hot air (potentiometer
position 1–4, depending on permissible temperature).
● Contraction of packings (potentiometer position 3–6).
● Shrinking of PVC and teflon tubes (potentiometer posi-
tion 3–5).
● PVC, polystyrol, acrylic glass and plexiglass can be
brought into the desired shape with the SD 1600 .
● PVC, polystyrol at 300 °C (approx. potentiometer posi-
tion 3).
● Acrylic glass and plexiglass at approx. 500 °C (approx.
potentiometer position 5).
● Weld-seal cracks in polyethylene containers, or poly-
ethylene or PVC pipes, e.g. eaves gutters, water pipes
with welding bands (potentiometer position approx. 3).
● If a shaping operation has been completed, the further
processing can be speeded up by blowing with the
SD 1600 in potentiometer position 1.
● Dry construction joints safely before further processing
with the SD 1600
● Warming up of parts to be joined by means of pressing.
● The SD 1600
is also ideal as a flameless Bunsen
burner in the large temperature range from approx. 80–
600 °C.
● Hot air may be used to help loosen screws that have
been overtightened.
● Speeding up of adhesive operations.
● Thawing.
● Thawing off of refrigerators and freezers
(Attention! Plastics may be distorted under heat!).
(potentiometer position 1–6).