MAXIMUS Smart Security Light SPL11-07A1W4-BKT Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
Use wire nuts to connect black wires together.
Insert both wires all the way into the nut and
twist until secure. Then repeat for the white
wires and for the ground wires. Wall wire
colors may vary. Recommended: Use of a
voltage detector to confirm the power is off.
7
Mount light fixture to long screws as shown,
then install both decorative nuts. Install a
light bulb (maximum wattage: 75W). Apply
silicone sealant between wall and light fixture
(optional). Reconnect power at fuse or circuit
breaker after installing the light.
WiFi Setup
After installation, on your iOS or Android smartphone, please visit getkuna.com/app to download and install our free
Kuna App. Follow in-app instructions to set up your Maximus Security Light.
6
Holding light fixture with both hands, align the two fixture
long screws into the light fixture screw posts.
8
Adjust the angle of the camera lens, loosening up the
locking ring. Use two fingers and turn it counter-clockwise.
Lock it back up by turning the locking ring clockwise. For
final adjustment, see the video feed on the phone after
downloading the app and setting up WiFi.
For Companion Only: Open app and follow the instructions
to pair your light with your Companion.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido