Antop AT-122B Manual Del Usuario página 3

LED
!
2.Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions.
3 . Locating and Placing
Test the antenna in multiple locations to find the best reception before mounting the
antenna. A high location or positioning the antenna toward the broadcast tower may
result in better reception.
Smartpass Amplifier
The
Push the smart switch On or Off and select the switching
with which more channels are received.
·Switch Off - The LED indicates
OFF/ON
·Switch On - The LED indicates
Scan channels after each switching in the Smartpass Amplifier.
CHANNEL SCAN
scanning for channels
must be powered in order to function.
yellow for normal
green for stronger
2
reception.
reception.
2