Descargar Imprimir esta página

Steren MIC-1057 Manual De Instrucciones página 2

Microfono profesional vocal y para instrumentos

Publicidad

Idiomas disponibles

Idiomas disponibles

Before using your new Steren´s product, please read this instruction manual to prevent any
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our web site (www.steren.com.mx) to obtain the latest version of
the instruction manual.
Aim the microphone toward the desired sound source (such as the talker, singer, or
instrument) and away from unwanted sources.
Place the microphone as close as practical to the desired sound source.
Work close to the microphone for extra bass response.
Use only one microphone to pick up a single sound source.
Use the fewest number of microphones as practical.
Keep the distance between microphones at least three times the distance from each
microphone to its source.
Place microphones as far as possible from reflective surfaces.
Add a windscreen when using the microphone outdoors.
Do not cover any part of the microphone grille with your hand, as this will adversely
affect microphone performance.
H I G H L I G H T S
The professional microphone delivers a clear response in the frequencies, being
perfect for musical instruments or voice.
With the unidirectional pattern and the POP filter will reduce the environment noise, so
you can use it for conferences, or live music.
Microphone
XLR cable
Microphone clip
Pouch
A P P L I C A T I O N S A N D P L A C E M E N T
Avoiding pickup of unwanted sound sources:
Place the microphone so that unwanted sound sources, such as monitors and
loudspeakers, are directly behind it.
To minimize feedback and ensure optimum rejection of unwanted sound, always test
microphone placement before a performance.
One mic on each tom, or between each pair of toms, 2.5 to
7.5 cm (1 to 3 in.) above tom heads. Aim each microphone
at top drum heads.
On double head toms, you can also remove bottom head and
place a mic inside pointing up toward top drum head.
GUITAR AND BASS
2.5 cm from speaker, on-axis with center of
speaker cone
2.5 cm from speaker, at edge of speaker cone
15 to 30 cm away from speaker and on-axis with
speaker cone
60 to 90 cm back from speaker, on-axis with
speaker cone
2.5 to 7.5 cm above rim of top head of drum.
Aim mic at snare head.
If desired, place a second mic just below rim of bottom head.
damage.
I M P O R T A N T
C A U T I O N S
TOMS
Medium attack; full balanced sound.
Sharp attack; emphasized bass.
Sharp attack; higher frequency sound.
Medium attack; full, balanced sound.
Softer attack; reduced bass.
SNARE DRUM
Most "snap" from drumstic.
More "snare" sound.
Lips less than 15 cm away or touching the windscreen, on
axis to microphone.
F R E Q U E N C Y R E S P O N S E
- 3
- 6
- 9
- 12
- 15
- 18
- 21
- 24
- 27
- 30
- 33
- 36
- 39
- 42
- 45
- 48
- 51
- 54
- 57
- 60
- 63
- 66
- 69
- 72
- 75
- 78
- 81
- 84
- 87
- 90
31.5
63
125
P R O X I M I T Y E F F E C T
Unidirectional microphones progressively boost bass frequencies by 6 to 10 dB below
100 Hz when the microphone is at a distance of about 6 mm from the sound source.
This phenomenon, known as proximity effect, can be used to create a warmer, more
powerful sound. To prevent explosive low frequency sound during close-up use, this
microphone's bass response gradually rolls off.
This provides greater control and helps the user take advantage of proximity effect.
S P E C I F I C A T I O N S
Frequency response: 80 to 14000 Hz
Impedance: 600 Ohms +/-30%
Sensitivity: 75dB +/-3dB
Weight: 200g
Product design and specifications are subject to change without notice.
Product: Vocal and instrument professional microphone
Part number: MIC-1057
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
VOCALS
Robust sound.
Emphasize bass.
Maximum isolation from other
sources.
MIC-1057
250
500
1k
2k
4k
8k
Frequency (Hz)
WARRANTY
CONDITIONS
RETAILER INFORMATION
01 800 500 9000
16k

Publicidad

loading