abc Armoire Manual Del Usuario página 16

Step 11
Carefully stand your unit upright.
å
Insert the METAL PINS (1R) into the hole locations of
å
your choice in the ENDS (A and B). Set the ADJUSTABLE
SHELVES (G) onto the METAL PINS.
Fasten the DOORS (F) to the ENDS (A and B). Use eight
å
GOLD 9/16" LARGE HEAD SCREWS (5S).
Fasten the BACKPLATES (90K) and KNOBS (89K) to the
å
DOORS. Use two GOLD 1" MACHINE SCREWS (50S).
Peel the FELT DISC from the FELT DISC CARD (1M). Stick
å
a FELT DISC on the DOORS where they come in contact
with the SHELF (D) and LARGE RUBBER SLEEVE.
Apply the TV WARNING LABEL (8L) to the SHELF (D).
å
You should be able to read the label when the TV is
removed from the unit. When the TV is in place, it should
hide the label. Peel off the backing and apply the label as
shown in the diagram.
NOTE: This is a permanent label intended to last for the
å
life of the product. Once applied, do not try to remove it.
NOTE: To make adjustments to the DOORS, loosen the
å
SCREWS in the HINGES, make needed adjustments, and
tighten the SCREWS.
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 25 lbs.
- The base of the TV must be able to sit
completely on this shelf.
Page 16
1M
B
F
89K
90K
1M
(8 used)
1R
Pro Tip: Lift with your
legs. And, you know,
your arms.
GOLD 9/16" LARGE HEAD SCREW
(8 used for the HINGES)
50S
GOLD 1" MACHINE SCREW
(2 used for the KNOBS)
G
G
A
D
8L
5S