Maintenance; Troubleshooting - ArmorAll AA20BW Manual Del Usuario

WARNING!
tool when cleaning or performing any maintenance.
STORAGE
1. Remove the battery pack from the tool before storing.
2. Clean all foreign material from the tools.
3. Store the tools and its accessories in a dry, frost free place.
4. Always store the tools in a place that is inaccessible to children. The ideal storage temperature
is between 40 °F (4°C) and 100°F (38°C).
5. Keep tools away from corrosive agents such as garden chemicals and de-icing salts.
6. We recommend using the original package for storage or covering the product with a suitable
cloth to protect it against dust.
CLEANING THE BLOWER
1. Remove the battery pack.
2. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the
air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air
vents in water.
3. Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household cleaners
may cause damage, and may cause a shock hazard.
GENERAL MAINTENANCE
1. Keep the blower clean and clear of debris. Do not allow foreign material into the battery port or
contacts. Wipe with a moist, soft cloth. Do no use solvents, water, or place in wet conditions.
2. Always remove the battery pack when not using and before storing the blower.
3. Keep the blower stored in normal room temperature. Do not store in excessive heat.
Problem
Motor fails to start when
switch trigger is turned on.
Unit will not start.
Unit will not blow.

MAINTENANCE

To avoid serious personal injury, always remove the battery pack from the

TROUBLESHOOTING

Possible Cause
Battery is not secure.
Battery is not charged.
Defective power switch.
Blocked tube.
To secure the battery pack,
make sure the latches on the
top of the battery pack snap
into place.
Charge the battery pack
according to the instructions
included with your model.
If within warranty period return
product to retailer of purchase.
Clear the blockage.
9
Solution