Blue Sound PULSE 2 Manual Del Usario página 3

1
4_
CONNECT ZO POWER
A Select the AC Power Cord appropriate for your region
and plug it into the Player, and then into your wall
outlet.
B The PULSE 2's LED button should turn Solid Green,
indicating that the player is in Hotspot Mode and ready
to be added to your home WiFi network.
Never force a power cord into a wall outlet. An adaptor
may be necessary in certain regions.
2
To see an instructional video on WiFi Setup, please visit
www.bluesound.com
CONNECT TO WiFi
A On your tablet or smartphone, look for the WiFi
network (hotspot) matching your PULSE 2's unique
network ID, and join it. The network ID is listed as the
product name (i.e. PULSE 2) immediately followed
by the last four digits in the MAC (Machine Access
Control) address (example: PULSE2-001A). The full
12-digit MAC address is printed on a sticker on the
back panel of your Player.
B Open a web browser on your tablet or smartphone and
enter setup.bluesound.com, and press "Go". A control
panel page should then appear.
C From the main menu displayed, select Configure WiFi.
D Select your home WiFi Network from the Configure
Wireless drop down menu.
E Enter your home network's Wireless Password in the
field provided (if it is a protected network).
F Select a Room Name from the drop down list, or create
a customized Room name in the field provided.
G Press Update and wait for the Player's light to turn
solid blue, indicating that the Player has successfully
joined your home WiFi network.
H Repeat steps A-G for each additional Bluesound
Player.
I Reselect your home WiFi network from your tablet or
smartphone's main network settings.
Alternatively, the PULSE 2 can be connected directly
to your wired home network or router using the
Ethernet cable provided.
_5