Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
3-DRAwER AccESSORy
MODEL # 14926 & 14927
service parts
caLL 1-800-366-7278 for service parts. Refer to Service
Parts Drawing for full listing of Service Parts. Please provide the
Model Number when calling.
Locating Model # information
Model numbers and other information required for service parts is
located on a white label on the upper right hand corner of the unit.
capacities
• weight of the unit is 63 lbs.
• The maximum weight for Drawer should be no more than
35 lbs.
Maintenance
• Periodically the surfaces should be cleaned with a mild
detergent and water.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• Auto wax will preserve the unit's luster finish. Apply the wax as to
a car. The wax will also help protect the unit against scratches.
• Lubricate the slides with grease or equivalent, (twice yearly).
Sears Brands Management corporation, Hoffman Estates, IL 60179 USA
safety
DanGer
is used to indicate a hazardous
situation which, if not avoided, will result in serious injury
or death.
WarninG
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
caution
is used to indicate a hazardous situation
which, if not avoided, may result in minor injury, moderate
injury, or property damage.
caution:
Read and follow all Safety Rules and
Operating Instructions before first use of this product.
DanGer
Do not
stand on this product. you may fall which may
cause personal injury.
Do not
mount this product on a truck bed or any
other moving object. This may cause personal injury or
product Damage.
• Appropriately secure this product before moving it with
a forklift.
Do not
tow with power equipment. The product could
tip, which may cause personal injury or product damage.
Do not
step in the drawers. you may fall which may
cause personal injury.
WarninG
use appropriate safety
using power and hand tools. Failure to do so may cause
personal injury or product damage.
use aDequate ManpoWer
and moving this unit. Failure to do so may cause personal
injury or product damage.
Do not
alter this product in any manner. This may
cause product damage or personal injury.
unit Must Be
located on a level surface. The
product may become unstable and tip if stored or moved
on an un-level surface, which may cause personal injury
or product damage.
caution
Be carefuL
when opening more than one drawer.
The product may become unstable and tip, which may
cause personal injury or product damage.
equipment when
when assembling
F1872

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Craftsman 14926

  • Página 1 3-DRAwER AccESSORy caution is used to indicate a hazardous situation MODEL # 14926 & 14927 which, if not avoided, may result in minor injury, moderate injury, or property damage. caution: Read and follow all Safety Rules and Operating Instructions before first use of this product.
  • Página 2: Carton Contents

    HarDWare carton contents tooLs requireD: A. Side Socket wrench 7/16" Socket B. Front Rail 11/32" wrench cross-tip Screwdriver c. Drawer 4" Flathead Screwdriver Square D. Drawer 9" E. Drawer 12" F. Slide f (6) HarDWare incLuDeD: 1/4-20 x 5/8″ carriage Bolt (Qty: 10) 5/16″...
  • Página 3 items needed: asseMBLy Front Rail (Qty: 1) items needed: 1/4-20 x 5/8″ carriage Bolt (Qty: 10) Side (Qty:1) 5/16″ washer (Qty: 10) Screw Leveler (Qty: 2) 1/4-20 Serrated Flange Nut (Qty: 10) process: note: when installing on 8' workbench, remove inner •...
  • Página 4 items needed: items needed: Drawer 4" (Qty: 1) #8-32 x 3/8″ Self-tapping Screw (Qty: 12) Drawer 9" (Qty: 1) Drawer 12" (Qty: 1) process: Slide (Qty: 6) • Install (6) workbench Slides on workbench frame, as #8-32 x 3/8″ Screw (Qty: 12) shown, using (2) #8-32 x 3/8″...
  • Página 5 process: operation • Insert the Drawer Slides into the workbench Slides and push all of the way to the back. • Pull the drawer open until it stops to ensure proper assembly. • Repeat for the rest of the drawers. Release Lever Style - Lift or lower (depending on the slide) the release lever on both...
  • Página 7: Piezas De Repuesto

    3-AccESORIO DE GAvETAS la propiedad. precauciÓn: lea y siga todas las reglas de seguridad y las MODELO 14926 y 14927 instrucciones de funcionamiento antes de usar este producto por primera vez. peLiGro •...
  • Página 8: Herramientas Necesarias

    HerraMientas conteniDo De La caja HerraMientas necesarias: A. Lado B. Riel delantero Llave de cubo cubo de 11.1 cm (7/16") c. Gaveta de 10.2 cm (4") Llave de 8.7 mm (11/32”) Destornillador estrella D. Gaveta de 22.9 cm (9") Destornillador de punta plana Escuadra E.
  • Página 9 elementos necesarios: arMaDo Riel delantero (cantidad: 1) elementos necesarios: Perno con cabeza de hongo de 1,6 cm (5/8″) de largo, 6,4 mm Lado (cantidad:1) (1/4") de diámetro y 20 roscas por pulgada (cantidad: 10) Nivelador (cantidad: 2) Arandela de 7,9 mm (cantidad: 10) Tuerca de la brida dentada de 6,4 mm (1/4") de diámetro y 20 roscas por pulgada (cantidad: 10) proceso:...
  • Página 10 elementos necesarios: elementos necesarios: Gaveta c de 10.2 cm (4") (cantidad: 1) Tornillo autorroscante (cantidad: 12) Gaveta D de 22.9 cm (9") (cantidad: 1) Gaveta E de 30.5 cm (12") (cantidad: 1) proceso: Deslizador (cantidad: 6) • coloque (6) (Gu) en el marco de la mesa de trabajo, como se Tornillo n.º...
  • Página 11: Funcionamiento

    proceso: funcionaMiento • coloque los deslizadores de gaveta (Gd) en los deslizadores (Gu) de la mesa de trabajo y empuje hasta el final. extracción e instalación de gavetas • Abra la gaveta hasta que llegue al tope a fin de asegurarse de que esté...

Este manual también es adecuado para:

14927

Tabla de contenido