MARTINS Industries MTRS Manual página 4

INSTALLATION
Fix the base on a flat surface, using appropriate fasteners.
Choose the correct electrical plug for your country.
Connect air inlet hose with appropriate pressure (see specifications).
SAFETY
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted.
Do not expose the device to rain, damp, heat, impact, etc to prevent from electric shock or fire.
Do not modify or use this product for any other application than what it has been designed for.
OPERATIONS
Only use this device once you have read the
instruction manual and / or have been trained
by your employer. The product should only
be used to repair tires within the maximum
load capacity.
Wear safety boots while using the device.
Install clamps on tire and use open pedal to apply pressure on the sidewalls.
Ensure the tire is stable on the platform.
Move lamp inside tire to improve visibility.
BEFORE using this product, read this manual and follow all its Safety and Operating instructions.
Failure to do so may result in personal injury and/or property damage. Retain these instructions
for future reference.
Tie back long hair and wear adequate
clothing while using this product. (Do
not wear loose-fitting clothing or
dangling accessories).
Crushing hazard