Publicidad
Idiomas disponibles
Idiomas disponibles
09 - Return Plasma TV to the
upright position and tightly screw
both fastening nuts.
6
11 - Regulate the leaning angle unscrewing the Nylon Nut (6).
This source allows fixing the AIRON CEILING SUPPORT on an inclined roof.
Note that no matter the situation, the tube must remain in the upright position.
The SUPPORT regular attachment to the ceiling (picture 2) is the prime
condition of its safety.
Thus, "Parabolt" anchors are recommended for cement slabs.
When installing on pre-cast slabs, use set screws fixed with nuts on the
upper side of the ceiling with big washers or preferentially use a perforated
plate of good dimension, to distribute the load of the entire se (AIRON
CEILING SUPPORT + plasma/LCD).
Drywall ceiling and similar material are not indicated for this kind of
installation.
Always consult a specialist to evaluate the regular attachment of the set.
10 - Release the manipulator (7),
turn the LCD/Plasma at will (360°
horizontal rotations) and put the
manipulator back to maintain the
position
*ATTENTION
SUPORTE AIRON CEILING M B
SUPORTE AIRON CEILING L B
7
30º
19
Publicidad
