Scosche REALM RH1060 Manual Del Usuario página 5

RH1060 FUNCTIONS & INDICATORS
NOTE: PLEASE REFER TO OVERVIEW ILLUSTRATIONS ON PAGE 3.
Function
Power on I Power off
Searching and Pairing•
Voice Control
Play/Pause
Answer/End call
Ignore call
Hold first call & answer incoming call
End first call & answer incoming call
Switch calls
Previous Track
Next Track
Volume up
Volume down
*PAIRING: T he following are general pairing instructions. Devices may vary. Consult your
devices's Bluetooth pairing instructions.
1. Make sure Bluetooth is turned in your device's settings.
2. Press and hold power button. In your device's Bluetooth menu search for and select "SCOSCHE RH1060".
Auto-Pairing: After powering on headset, wait 1 O seconds for headset to recognize your audio
device. To override the 10-second delay: Make sure the headset is turned off. When turning on the
headset press and hold the power button for 8 seconds.
REMARKS:
• Headset will connect automatically to previously connected device.
• Headset will automatically turn off after 15 minutes on standby.
• On some devices, when MFB is pressed 3 times, playback of the current track will repeat from
beginning. If this occurs imediately press the MFB 3 additional limes.
IMPORTANT NOTE FOR RH1060
Due to an iOS6 bug, MC support has been temporarily disabled.
TO ENABLE ACC:
1. On the headset press and hold "Volume +" and "Volume -" at the same lime
(approximately 1 second).
2.
Turn off power on the headset.
3. Turn the headset back on.
Note: (2) short beeps will indicate ACC has been turned ON. When ACC is enabled
the blue LED indicator on the headset will light continuously.
TO DISABLE ACC: Repeat steps 1-3 above.
Note: (2) short beeps will indicate ACC has been turned OFF. When ACC is disabled the
blue LED indicator will light intermittently (3 seconds on / 1 second off).
Operation
Hold the power button for about 3 seconds
Press and hold the power button for 6 seconds
Press and hold the MFB for 1.5 seconds.
Press the MFB once.
Press the MFB once.
Press and hold the MFB.
Press the MFB once.
Press and hold the MFB for 3 seconds.
Press the MFB once.
Press the MFB (3) times.
Press the MFB (2) times.
Press and hold the V+ button.
Press and hold the V- button.
5