Showtec LAMPY Series
WARNING
Risk of burns due to hot surface
The surface and the inner parts of the device can become very hot during operation.
●
Do not touch the device during operation.
●
Allow the device to cool down for at least 15 minutes before handling.
WARNING
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at
strobe lights.
WARNING
Possible eye damage caused by high light intensity
Possibly hazardous optical radiation emitted from this device.
●
Do not look at the operating light source. May be harmful to the eye.
●
Do not look at the light source with optical instruments that may concentrate the light output.
●
Make sure that persons are not looking directly into the light source when the device lights up
suddenly. This can happen when the device is powered or when it receives DMX signal, or when
certain menu items are selected.
●
Disconnect power supply before servicing.
●
Wear protective goggles if looking into light source during service or maintenance.
Attention
Power supply
●
Before connecting the device to the power supply, make sure that the current, voltage and
frequency match the input voltage, current and frequency specified on the information label on the
device.
●
Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the
required power consumption of the device.
Attention
General safety
●
Do not insert objects into the air vents.
●
Do not connect the device to a dimmer pack.
●
Do not switch the device on and off in short intervals. This decreases the device's life.
●
Do not shake the device. Avoid brute force when installing or operating the device.
●
Change the lens or the LEDs if they are visibly damaged to such an extent that their effectiveness is
impaired, for example by cracks or deep scratches. Contact your Highlight International dealer for
more information, as servicing can be performed only by instructed or skilled persons.
●
If the device is dropped or struck, disconnect the device from the electrical power supply
immediately.
Producto: 50733 / 50734 / 50735 / 50736
12