Adjusting The Volume - Fusion Apollo MS-ERX400 Manual De Inicio Rápido

3
Select DEVICE NAME, and enter a
unique name for the device.
Setting the Home Zone
The home zone is the speaker zone that
you adjust by default when you turn the
dial on the remote control.
The home zone can be assigned to any
speaker zone on a compatible stereo on
the Fusion PartyBus network. When you
set a home zone on the remote control,
the remote control will be associated with
that stereo for playback control as the
default.
1
> SETTINGS.
Select
2
Select the name of the stereo you
want to use with this remote control.
3
Select ASSIGN HOME ZONE.
4
Select a zone.

Adjusting the Volume

Using this remote control, you can control
the volume of any zone on any stereo
connected to the Fusion PartyBus
network.
1
Turn the dial to adjust the volume for
the home zone on the stereo.
2
If necessary, press the dial to switch
between zones.
4
NOTE: If a stereo is part of a group,
you can adjust the volume of all
stereos in the group or individual
zones on each stereo (page 4).
TIP: You can press and hold the dial to
adjust the subwoofer level of a zone.
Creating or Editing a Group
Before you can create a group, you must
connect multiple compatible stereos to the
Fusion PartyBus network. See the
installation instructions provided with your
stereo for installing and configuring the
network.
You can combine compatible stereos on
the network into groups. Grouped stereos
can share available sources and control
media playback and volume on all of the
stereos in the group, which allows for a
synchronized audio experience across the
vessel. You can quickly create, edit, and
break up groups as needed from any
compatible stereo or remote control on the
network.
NOTE: You can adjust the volume of any
zone on any compatible stereo on the
network, regardless of whether or not
those stereos are in the group.
Quick Start Manual