Encore electronics ENKVM-USB Manual Del Usuario página 3

Installation
NOTE:
1. Before you begin, make sure that the power to all the devices you will be connecting has
been turned off. You must unplug the power cords of any computers that have the
Keyboard Power On function. Otherwise, the switch will receive power from the
computer.
2. To prevent damage to your equipment, make sure that all the devices you will be
connecting are properly grounded.
Installing your new ENKVM-USB involves the following steps:
1. Plug your keyboard, monitor, and mouse into their ports on the ENKVM-USB. The
keyboard and mouse ports are labeled with an icon to distinguish them.
Note: When using a wireless composite keyboard and mouse, its USB cable must be
plugged into the ENKVM-USB's keyboard port for the Hotkeys to function.
2. Plug the USB and video connectors of the attached KVM cables into their respective
ports on the computers you are installing.
3. Turn on the power to the computers.
Note: The ENKVM-USB by default links to the first computer you turn on.
Operation
Hotkey Port Selection
All Hotkey port switches begin with tapping the [Scroll] key twice, and then press the [Enter]
key.
[Scroll] [Scroll] [Enter]
Invokes Auto Scan Mode
Start Auto Scan. Tapping the [Scroll] key twice, and press the [A] key. Then, press the [Enter]
key.
[Scroll] [Scroll] [A] [Enter]
Cancel Auto Scan Mode
Press [ESC] or [Space] key
2