Technical Specifications - Marmitek PROGUARD800 Serie Modo De Empleo

11.
Connect the battery pack to the connector on the Main Board.
12.
Position the front cover's top holding hooks onto the back cover and snap the
front cover closed.
13. Follow this step in the ProGuard800 Installation manual:
4.7.9: GSM Signal Strength
14.
Refer to the installation manual for further configuration of the GSM800.
Activating the siren
Press 9 followed by 1111
1.
2. Press 9155 now (the display now shows: 5.WIRED SIREN DISABLED).
Press now (the display now shows: 5.WIRED SIREN ENABLED).
3.
Press 9 to confirm.
4.
Press 9 4 times to leave the installation menu.
5.

TECHNICAL SPECIFICATIONS

Frequency range:
External antenna connector: MCX connector
Ambient temperature:
Specifications may be modified without prior notice.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol
on the product and/or its packaging must not be disposed of with unsorted
municipal waste. The symbol indicates that this product should be disposed of
separately from regular household waste streams. It is your responsibility to
dispose of this and other electric and electronic equipment via designated
collection facilities appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old equipment, please contact
your local authorities, waste disposal service, or the shop where you purchased the product.
GSM800
E-GSM 900
GSM1800
GSM1900
-20° C to + 55° C (operation)
-20° C to + 70° C (storage)
4