Bo Jungle Grey B920030 Instrucciones De Uso página 3

Product assembling instructions:
1. Assemble the spacer and the wheel into the iron shaft in order and then install them into the front steering
axle.
2. On the other end, assemble the circlips in order to complete the front wheel assembly. When assembling
the circlip, take one hand to press the circlip, another hand to divert the opening side for easy installation.
3. Assemble the front wheel parts from the bottom up into the main body. The front wheel parts and the body
must be placed in the same direction.
4. Assemble the steer into the main body.
5. Assemble the iron shaft, the spacer and wheel. Then install them into the main body.
6. On the other side, assemble the wheel, the spacer and the circlips in order into the main body. When
assembling the circlup, take one hand to press the circlip, another hand to divert the opening side for easy
installation.
7. Install the wheel covers into the four wheels and then fasten all of them.
8. The scooter installation is complete – The front side.
9. The scooter installation is complete – The back side.