Landxcape LX790 Guia De Instalacion página 13

2.Set year, date and time
Set year, date and time are compulsory setting items. If you don't set these
items, it will influence the schedule time in the following setting. These
items should be set in the order of year, date and time. For the year setting,
keep pressing for 3 seconds until the icon
blinking on the display, for example,
the year you want. Then press
Meanwhile, the icon will be flashing again and a number will be
displayed to indicate the date, for example,
29. When is flashing, use
to confirm. Then will be flashing. Use the same method to select
the number and press to confirm to finish the date setting.
Meanwhile, the icon will be flashing and the time will be displayed, for
example, . When is blinking, use
number and press to confirm. Then
method to select the number and press
setting is completed and Landxcape
3.Set work area
Keep pressing for 3 seconds. When the icon
. A number will be blinking on the display, for example,
is the lawn area. The working time will be automatically set according to
the size of your garden. Use or
increase / decrease by 50m 2 each time the
press to confirm. Then Landxcape
4.Change default start time
The default start time of 9:00 can be changed to anytime by keep pressing
both and buttons at the same time until a ding sound is heard.
For example, keep pressing both
your Landxcape TM will start mowing from 14:05.
EN
and a number are
. Use or to select
to confirm to finish the year setting.
, meaning September
or to select the number and press
or to to select the
will be blinking, use the same
to confirm. Now the time
TM will enter the standby page.
is blinking, press
, which
to set the lawn area (the area will
/ is pressed), and
TM will enter the standby page.
and buttons at 14:05, and
Only for reference
Only for reference
Only for reference
Only for reference
Standby page
Only for reference
13