Connecting To The Tv - Samsung SEK-2500U Manual

Connecting to the TV

Press the TV button on the Samsung Smart Control to turn on the TV. The Samsung Smart Control connects to the TV
automatically. If this is the first time you have turned on the TV, the Initial Setup screen appears. Follow the directions on the
screen to set up the TV.
Reconnecting the Samsung Smart Control to the TV
If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the problem persists, pair the
Samsung Smart Control and TV again.
1. Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control sensor.
2. Press the RETURN button and
3. The connecting icon appears on the screen. A few moments later, the connected icon appears. The Samsung Smart
Control is paired to the TV.
[SEK-2500U-SA]BN68-06255A-00L03.indb 9
GUIDE button simultaneously for 3 seconds or more.
<The Samsung Smart Control's pairing buttons>
English-9
2014-04-17 4:59:10