Bissell OPTICLEAN 42Q8 Serie Guia Del Usuario página 12

M
aintenance and care
Cleaning the Foam Post-Motor Filter
1. Unplug the vacuum from the
electrical outlet.
2. Lift up on both of the filter storage tabs to
open the post-motor filter compartment.
3. The Foam Post-Motor Filter is the black
filter located at the top of the compartment
door. Gently remove this filter.
4. The Foam Post-Motor Filter can be gently
cleaned by washing in warm water
with a mild detergent. Allow filter to dry
completely before reinstalling. If filter is
torn, replace with a new filter.
5. Reinstall filter. Press down on the filter
storage door and snap back into place to
close the filter compartment.
12
w w w . b i s s e l l . c o m
3.
Foam
Post-Motor Filter
Tip:
For maximum cleaning performance,
check the filters often and clean or
replace if necessary.
WARNING:
Do not operate cleaner
with damp or wet filters or
without all filters in place.
8 0 0 . 2 3 7 . 7 6 9 1