EDM Product 07592 Manual De Instrucciones página 14

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
07592
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
CHARGING
- The switch must be turned off when charging.
- Shaver should be charged under the circumstance of temperature
between 5°C-35°C.
Please don't charge it in the sun or beside a warmer ( fig.2)
- The applicable voltage is 220V~50Hz
- To guarantee a long life for appliance,please take off it from the wall
socket when the battery has been fully char- ged,and charge it when it
is empty.Do not connect it with power continuously after nishing the
charging.
- Insert the end of power line into the socket of shaver,and then put the
plug into power socket,the indication lamp will be light at the same
time( g.3,4).
- The shaver should be charged for 8 hours normally.Nor- mal shaving
time is 45 minutes after fully charged.
- Please do not charge the shaver in a closed pouch.
- Please take good care of the power line for spare use after charging.
- Once the power line is damaged,it must be replaced from the manu-
facturer or after service center.
SHAVING
- Press the switch lock key so the shaver can be used ( fig.5)
- Rapidly move the shaver back and forth against the growing direction
of beard ( fig.6)
- The shaving is best when the face is dry,so please shave before or
some time after washing the face.It will take some time for your skin to
get used to the RUITUO shaving device.
- Hair on the neck can also be shaved in this way.
- Turn off the shaver,put on the dustproof cover to avoid damage ( fig.7).
- Don't use it in case that shaving heads is damaged,as it may hurt your
skin.
TRIMMER
- Use to trim beard on the temple and other long beard.
- Slide the trimmer upwards to push it out ( fig.8)
- Turn on the shaver to trim the beard ( fig.9)
- Lubricate the trimmer teeth every two months with a drop of sewing
machine oil (fig.10)
CLEANING
- Turn off the shaver when start cleaning.
- Regular cleaning guarantee shaving performance.