Consideration - koban KT 6500 Instrucciones De Uso Y Mantenimiento

KT 6500
Digital thermometer

Consideration

When the sensor is first plugged into the thermometer, or if the sensor is
changed, the plug must be allowed to stabilize at the temperature of the
socket, which is in thermal contact with the cold junction compensation
device, for greatest accuracy is to be achieved. This will only take a couple of
minutes and only applies if the sensor plug has previously been exposed to
an ambient temperature different to that of the thermometer.
Note that in common with other thermocouple thermometers the accuracy
specification applies only to the instrument itself and allowance must
be made for limits of error permitted in thermocouple. The relevant
specifications and respective limits for K type thermocouples are:
DIN 43710
Measurement Temp.
0 ºC A 400 ºC
400 A 1100 ºC
JIS C1602-1981
Measurement Temp.
>0ºC<1000ºC
>0ºC<1200ºC
>-200ºC<0ºC
Instructions manual | 12
Allowable Error
±3%
±0,75%
Class
0,4 ±1,5ºC o ±0,4% de Temp. mesurée
0,75 ±2,5ºC o ±0,75% de Temp. mesurée
1,5 ±2,5ºC o ±1,5% de Temp. mesurée
Allowable Error
www.grupotemper.com