Equipment Description; Technical Features; Installation - Selecta INCUBAT 19L Manual De Instrucciones

INSTRUCTIONS MANUAL CODE 80021 REV F
2000009
Power (W)
Capacity (L)
Max temperature
Spatial variations*
Stability*
Thermometer error
Weight (Kg)
Inner dimensions
(cm)
External dimensions
(cm)
* Measured according to the measurement procedure of J.P. SELECTA, s.a.
J
.P. SELECTA s.a.
PROGRAMMABLE TIMER OF 24 HOURS
For continuous cycle with on-off switch levers that can be operated every
15 minutes.

EQUIPMENT DESCRIPTION

INCUBAT incubators are designed for bacteriological culture. The heat
distribution is produced by natural convection. The incubator is provided
with a tempered glass inner door that allows the visualization without
lost of temperature.

TECHNICAL FEATURES

Voltage supply 115-230 V 50/60 Hz as indicated on the machine
characteristics plate.
2000205
165
19
26
Height 30
Width 25
Depth 25
Height 50
Width 60
Depth 44

INSTALLATION

Put the incubator on a flat horizontal, level surface, leaving a space of
about 10 cm at the back of the machine.
Do not install the incubator near sunny or heating places.
For an optimum function, the ambient temperature must not be over
30ºC.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
May/2012 (It can be modified without notice)
2000206
245
36
36
40
30
30
60
65
49
2000009
2000207 2001615
315 275
80 52
80ºC
±2ºC
±0,4ºC
±5ºC
54 46
50 33
40 47
40 33
70 53
74 82
59 52
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page.: 12
2000994
535
150
78
50
60
50
70
95
68