blackVault AR4131 Folleto De Instrucciones página 14

Remote Control Does Not Control Docked iPod
• Remove the iPod from the docking port and reattach it, making sure
that there is a secure fit between the iPod and the docking port.
• Make sure that the main power switch on back of the main unit
is switched on. The remote control will not function if the power
switch on back of the main unit is switched off.
• Make sure that there is a clear path between the remote control and
the speaker system, and make sure that you are pointing the remote
control directly at the front panel of the speaker system's main unit.
• Remove the remote control's battery to ensure that it is correctly
inserted in the battery compartment. If not inserted properly,
realign the battery to fit securely into the compartment.
• Move around the room and try to use the remote from more than
one location.
• Press the remote control's power button on and off to verify that
the remote signal is controlling the main unit.
• If you still cannot operate the docked iPod with the remote control,
make sure the remote control operates the other speaker system
functions (volume, bass, power). If it does not control these
functions, replace the battery in the remote control with a new battery.
iPod Does Not Charge
• Switch the power switch on the back of the main unit to the off
position.
• Remove iPod from the docking port and confirm that you are using
the appropriate insert for the model of iPod you have.
• Detach the iPod from the speaker system and check for obstructing
debris that may have lodged in the recessed docking port on top of
the main unit.
• Reinsert iPod into docking port and establish a secure connection.
• Switch the power switch on the back of the main unit to the on
position.