Kohler K-13960 Guia De Instalacion página 9

Hex Nut and
Adjustment Screw
4. Adjust the Foot Pedal(s)
NOTE: If the height of the foot pedal(s) needs to be adjusted, follow
the procedure below.
Remove the cover from the valve.
Loosen the hex nut.
NOTE: For foot controls with two pedals, both foot pedals must be
at the same height as one another.
Turn the adjustment screw counterclockwise until the foot pedal
will no longer touch the cover.
Retighten the hex nuts.
Reinstall the cover over the valve, then recheck the height of the
pedal(s).
Secure the cover to the valve with a plated screw.
Kohler Co.
Foot Pedals
9
Cover
1034416-2-B