Bestway Pool+ 58230 Manual De Instrucciones página 5

Always unplug the appliance:
• On raining days
• Before cleaning or other maintenance
• Leave it unattended on holidays
When the appliance will be not used for long time, such as in the
winter, the pump should be disassembled and stored indoor.
Safekeeping the instruction. For reconstruction the pool set every time,
please always refer to the instructions.
If instruction is missed, please contact with Bestway or search it in
website: www.bestwaycorp.com
NOTE: This product is not intended for commercial use. For household
use only.
SAVE THESE INSTRUCTIONS.
Parts Reference Overview
Before assembling the drain pump, become familiar with all parts.
(See Fig.1)
P6005
Hose Seal Ring
NOTE: To order spare parts for the drain pump, list the part No.
Pump Installation and Operation
1. Connect the provided hose to the drain pump by fastening the
hose clamp. (See Fig.2)
NOTE: Two types of hose adaptors are provided to be used with
different garden hoses, see Fig.3 & Fig.4 for assembly.
2. Vertically place the drain pump into the pool with the other end
of hose to the drain area. (Check local regulations for drainage
by-laws)
NOTE: Do not put the plug into the pool.
3. To turn on the pump, insert the plug into a proper socket.
NOTE: When the water level of the pool is less than 2cm, do not
use the drain pump.
NOTE: Keep the drain pump vertical at all times.
NOTE: Do not dry run the pump.
P6124
Hose Clamp
P6556 P6555
Hose Adaptor Hose Adaptor
5
P6H565