4
FUNCTIONS
1.
Top water tank
2.
Control panel
3.
Adjustable air outlet
4.
Handle
5.
Air inlet
6.
Honeycomb filter
7.
Filter locking plate
8.
Drain
5
INSTALLATION
5.1 Placing the appliance
1. Place the appliance in a room of 9 m
2. Place the appliance close to an open door or window.
3. Place the appliance on a horizontal flat surface.
4. Keep minimum (50 mm) space around the appliance for optimal ventilation.
5. Do not place the appliance near a heat source. This could damage the appliance.
6. Do not expose the appliance to direct sunlight.
7. Do not install the appliance where it could be subjected to:
- Mechanical vibration or shock
- Excessive dust
- Lack of ventilation, such as cabinet or bookcase
8. Make sure the air inlet and outlet are not blocked, or close to loose objects e.g. curtains.
5.2 Filling the water tank
Make sure the drain is closed while filling.
5
Make sure the water does not go above the MAX level. Drain if necessary.
5
Make sure the water does not go below the MIN level.
5
1. Fill the top water tank with water.
5.3 Adding ice packs
Ice packs can be added to provide extra cooling.
5
1. Add frozen icepacks to the top water tank.
2. Add water up to the max indicator.
3. Close the top water tank.
9.
Power cable
10. Ice packs
11. Cool button
12. Off button
13. Low button
14. Mid button
15. High button
16. Swing button
or bigger.
2
5