6. Correcting problems
Problem
Remedy
The nozzle will
Batteries are empty.
not switch on
Insert new batteries,
'3. Inserting the batteries'.
w
Batteries are not inserted
properly.
Insert the batteries correctly,
'3. Inserting the batteries'.
w
Nozzle vibrates
Batteries are nearly flat.
more and more
Replace the batteries,
weakly
'3. Inserting the batteries'.
w
NOTE:
If you cannot solve the problem following this ta-
ble, please contact us, (
w
on page 46).
7. Disposal
WARNING!
Danger of poisoning from mercury-vapour
content in UV radiation source
The lamp that produces UV radiation contains
highly poisonous mercury vapour!
Never attempt to break the nozzle, and in
X
particular the lamp!
When the nozzle has worn out, take it to the
X
local authority collection point.
CAUTION!
Protect the environment!
The nozzle, its electronic components,
the lamp containing mercury, and the bat-
teries are not permitted to be disposed of
in domestic waste. When the nozzle has
worn out, take it along with its accesso-
ries to the local authority collection point.
'International Service'
12
8. Warranty and Service
The statutory warranty regulations in accordance with
the EU Directive 1999/44/EC apply.
In non-EU countries the minimum requirements of the
warranty in the respective country apply.
'International Service' on page 46
w