Tripp-Lite PS-415-HGULTRA Manual Del Propietário

Multicontacto

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Owner's Manual
PS-415-HGULTRA
Power Strip
Patent Number 7,375,939
Español 4 • Français 6
IMPORTANT SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
WARNING!
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment
or to significantly affect its safety or effectiveness is not recommended. Do not
use this equipment within oxygen-enriched atmospheres, or within 0.3 m (1 ft.)
of a point at which an oxygen-enriched atmosphere is intentionally vented.
CAUTION!
DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or
adapters that eliminate the connection to ground. The power strip is designed
for indoor use only. Install the power strip away from heat-emitting appliances
such as radiators or heat registers. DO NOT install where excessive moisture or
other conductive contaminants are present. DO NOT connect the power strip to
the output receptacles of an Uninterruptable Power Supply (UPS). Never install
electrical wiring during a lightning storm.
AUTOMATIC OPERATION!
The power strip includes a ground detection circuit with LED for added safety.
When the power strip is plugged into a wall outlet, it detects whether a proper
ground is present. If a proper ground is detected, the green LED illuminates
and AC power is routed to the output receptacles. If a proper ground is not
detected, the LED does not illuminate and AC power is not routed to the output
receptacles. The power strip will distribute AC power only when connected to a
properly grounded AC outlet.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
1
17-04-288-932535.indb 1
5/4/2017 5:02:03 PM

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Tripp-Lite PS-415-HGULTRA

  • Página 1 Owner’s Manual PS-415-HGULTRA Power Strip Patent Number 7,375,939 Español 4 • Français 6 IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. WARNING! Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
  • Página 2 Installation Connect Your Power Strip to Your AC Power Line Plug the power cord into a utility outlet. The power strip’s power cord should only be connected to a standard 3-wire grounded 120V AC 60 Hz outlet. Connect AC Equipment to Your Power Strip Plug the AC power cords of your equipment into your power strip.
  • Página 3: Warranty And Product Registration

    Warranty and Product Registration Limited Lifetime Warranty Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole discretion.
  • Página 4: Operación Automática

    Manual del propietario PS-415-HGULTRA Multicontacto Número de Patente 7,375,939 English 1 • Français 6 IMPORTANTES INSTRUCCIONES DE SEGURIDAD. GUÁRDELAS. ¡ADVERTENCIA! El uso de este equipo en aplicaciones de soporte de vida en donde la falla de este equipo pueda razonablemente hacer suponer que causará fallas en el equipo de soporte de vida o afecte significativamente su seguridad o efectividad, no está...
  • Página 5: Instalación

    Instalación Conecte el cable de contactos a la línea de suministro de corriente alterna Enchufe el cable de corriente en una toma de energía eléctrica. El cable de corriente de la barra de contactos debe conectarse a una toma estándar de 3 hilos, conectada a tierra, de 120 VCA y 60 Hz. Conecte el equipo de corriente alterna a su tomacorriente múltiple NO use cordones de extensión o adaptadores que eliminen la conexión a tierra.
  • Página 6: Fonctionnement Automatique

    Manuel de l’utilisateur Barre d’Alimentation PS-415-HGULTRA Numéro de Brevet 7,375,939 English 1 • Español 4 IMPORTANTES CONSIGNES DE SÉCURITÉ. CONSERVEZ CES INSTRUCTIONS. ATTENTION : Il est déconseillé d’utiliser cet équipement dans des applications médicales où une panne de cet équipement pourrait normalement provoquer la panne de l’équipement de survie ou altérer notablement sa sécurité...
  • Página 7 Installation Brancher le bloc d’alimentation à la ligne électrique Brancher le cordon d’alimentation à une prise de courant. Le cordon du bloc ne devrait être branché qu’à une prise c.a. 120 V, 60 Hz. Branchement de votre équipement c.a. à votre bande d’alimentation Branchez les cordons d’alimentation de votre équipement dans la bande d’alimentation.
  • Página 8 Garantie Garantie à vie limitée Le vendeur garantit que ce produit, s’il est utilisé conformément à toutes les instructions applicables, est exempt de tous défauts de matériaux et de fabrication pendant toute sa durée de vie. Si le produit s’avère défectueux en raison d’un vice de matériau ou de fabrication au cours de cette période, le vendeur s’engage à...

Tabla de contenido