Technical Details - Proxxon NG 2/S Manual De Instrucciones

Translation of the Original
GB
Operating Instructions
PROXXON - POWER SUPPLY
UNITS - NG 2/S AND NG 2/E
Description
The NG 2/S and NG 2/E Power Supply
Units provide a safe power source for all
PROXXON -devices requiring 12 Volt d.c.
PROXXON-Power Supply Units have been
developed to work efficiently and are built
strictly in accordance with the VDE- safety
regulations: (German Electrical Engineering
Association)
• Compact construction, Noryl casing
(particularly heat resistant)
• ports for instruments, hinged storage
hooks
• Electronic overload protection (PTC)
• Thyristor regulated speed control (not
applicable for NG 2/S)

Technical Details

Mains supply
Off load voltage
Operational voltage
For use in dry
environments only
Protection class II device
Please do not dispose off
the machine!
- 6 -
230 V~, 50-60 Hz
16 V
12 V (at 2 A)
Overview
Legend (see diagram)
1 Socket for PROXXON-Electrical
Appliance
2 LED display
3 Hooks for electrical tools
4 Ports for instruments
5 Control knob (not applicable for NG 2/S)
Safety Considerations
For your own safety please observe the
following:
• Power Supply Units are only to be stored
and used in dry rooms.
• Power Supply Units are to be kept out of
children's reach.
• Remove the mains plug before cleaning
the Power Supply Unit.
• Keep the mains power cable away from
the working area.
• Check the power cable regularly. If it is
damaged, it must be replaced at an autho-
rized service center.
• Power Supply Units are to be opened only
by authorized service personnel.
• If the Power Supply Unit cuts out due to
overloading, then immediately switch off
the electrical device which is attached
(danger of uncontrolled running).
• Switch of the Power Supply Unit after use
• Do not use the Power Supply Unit for pur-
poses other than intended.
• Do not use the Power Supply Unit in the
vicinity of inflammable gases or liquids.
Instructions for Use
1. Ensure that the electrical appliance is
switched off before connecting to the
Power Supply Unit.
Important!
Take the necessary safety precautions
to prevent uncontrolled start up of the
electrical appliance when connecting the
Power Supply Unit (e.g., hold the appliance
securely)