Holiday living 298-141436050-1-LED Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Place all the parts flat on the floor.
Align the two halves of the flamingo's body (A)
together.
Insert the metal rod on one half of body (A) into the
corresponding hole on the other half.
2. Insert a plastic tie (AA) through each pair of matching
rings on the two body halves and fasten them together.
Insert the tapered end of the crooked leg (B) into
the corresponding tube at the bottom of the body
assembly.
Insert the tapered end of the straight leg (C) into
the corresponding tube at the bottom of the body
assembly.
Hardware Used
Plastic Tie
3. Insert the metal tube of the support stand (E) into
the thicker end of the straight leg (C).
Insert the two metal rods of the head and neck (D)
into the corresponding holes on top of the body
assembly.
4. Insert a plastic tie (AA) through each pair of
matching rings on the body (A) and head and neck (D)
and fasten them together.
Adjust the decorative bow to the desired position on
the neck.
Secure the figure to the floor using the ground stakes
(BB) provided. Plug into a properly grounded receptacle.
Hardware Used
Ground Stake
x 3
x4
1
2
3
4
4
4