Press the remote control GUIDE
button while the program guide
appears on-screen to display the
Guide Options menu.
Logo guide
28
Using program guides
• Browse up or down one channel at a time with the
highlight is in the grid.
• Use the remote control
of guide entries at a time.
• Move the highlight to the right to show later time periods.
Turn off the Picture-In-Guide:
1. Press the remote control
2. Press the
button again to access the
GUIDE
3. Highlight the Picture-in-Guide menu button.
4. Press
SELECT
to toggle the feature off.
• Select channels, rather than specific programs.
• The current program title appears above the logo grid as you highlight each
channel. Only current programming is available in the Logo Guide.
• Video of the current program appears in the Picture-in-Guide window as
you highlight each channel.
Title of the program on the network selected in menu
Logo guide with Picture-In-Guide active
Use the
button to scroll through the guide entries a full page at a
Channel (CH)
time, or use the
joystick to scroll through the guide entries one at a time.
S
You can display the most channels per screen (refer to the figure below) by
turning off the Picture-in Guide feature, using the description-only mode.
Title of the program on the network selected in menu
Logo guide with Picture-In-Guide disabled (description-only mode)
button to scroll through a full page
CHANNEL(CH)
button.
GUIDE
Options
An image of the currently airing
program highlighted in the menu
selection appears here
SM
a
cine
m
x
TM
®
TM
a
cine
m
x
TM
®
TM
joystick when the
S
menu tab.
SM